ICAO standards for obstruction lights

Chapter 6 of ICAO Annex 14 Volume I “Aerodrome Design and Operations”, ICAO regulates obstacle lighting’s photometric characteristics. Some recommendations are clarified about how to deploy…

Кэшбэк vavada

Кэшбэк Vavada как способ заработать на играх Кэшбэк vavada Получите максимальную пользу от ваших вложений,…

NatureConnect – Natural lighting solutions

NatureConnect brings daylight indoors We spend a lot of our time indoors, often in locations without windows or proper access to daylight. Studies show that the natural light has a […]

EcoSet Basic control – PHILIPS

Philips EcoSet basic control system – save energy in a simple, reliable, and affordable way EcoSet basic controls Take the energy-saving capabilities of your lighting solutions to a whole new…

Sản phẩm

DUS360CS – Philips Dynalite – Multifunction Sensor

Surface mount 360° ceiling sensor

 

Danh mục:

Mô tả sản phẩm

The Philips Dynalite DUS360CS is a surface mountable 360 degree multifunction sensor that combines motion detection (PIR), infrared remote control reception (IR) and ambient light level detection (PE) into one device in applications such as hotels, restaurants and homes

  • Motion detection feature – Detects the presence or absence of motion and adjusts lights accordingly.
  • Segmented click-up bezel – Surrounds the motion sensor element and enables a portion of the sensing field to be masked. This prevents nuisance detection from adjacent doorways or corridors.
  • Ambient light level regulation – In applications where it is critical to maintain precise light levels, the PE function reads ambient levels and adjusts artificial light accordingly.
  • Infrared receive capability – Manually adjust light levels using a hand-held remote control, via the inbuilt IR receive sensor of the DUS360CS.
  • Daylight harvesting mode – Delivers automatic energy savings.
  • Suitable for plenum use – UL approved for installation in air-handling plenum spaces
Mô tả • Cảm biến đa chức năng gắn nổi
Thông số kỹ thuật • Cấp nguồn: Dynet (cáp CAT5E)
• Loại cảm biến PIR: Quad element pyroelectric
• Chiều cao lắp đặt: 2.1~4m
• Vùng quét: max 5 m (16.4 ft)*
• Cảm biến ánh sáng: 5-5000 lux
• Cấp bảo vệ: IP20
• Kích thước (HxW): 41 x 72 mm (1.61 x 2.83 in)
Kết nối • Cổng ra: 1 x 5-way screw terminal +V, D-, D+, GND, SHLD
• Kích thước dây dẫn: 2.5 mm2 (#12 AWG) (max)
Điều khiển • Lập trình chức năng

* Typical detection range at ≤ 25°C (77°F). Range is reduced at higher temperatures.

Specification Sheet

Installation Instructions